There’s a good chance that if you drive a Subaru, there’s a catalytic converter under the hood. And if that’s the case, there may be money to be made by discarding it. Catalytic converters are made from valuable materials like platinum and palladium, which can fetch a high price when salvaged. In this blog post, we’ll talk about how to spot a Subaru catalytic converter, what materials are valuable inside them, and how much money you can expect to make from scrap metal.
Let’s take a look!
How many catalytic converters does a Subaru have?
Most Subaru models have two catalytic converters – one for the front exhaust and one for the rear. (primary and secondary). The primary converter is located close to the engine and is used to reduce engine emissions. The secondary converter is located further down the exhaust system and is used to reduce tailpipe emissions.
However, there are some models (such as the Subaru Outback) that only have one converter. So it’s important to know how many cars you have before you start scrapping.
How can you identify a Subaru catalytic converter?
Subaru catalytic converters are marked with a stamped metal tag that includes the words “SUBARU” and “CATALYTIC CONVERTER”. The label also includes a serial number that can be used to identify the drive.(EG FCFH4 3712 SD🇧🇷
What materials are valuable inside Subaru catalytic converters?
Precious metals like platinum, palladium and rhodium are used in the manufacture of catalytic converters. These metals are valuable because they are effective in reducing emissions. Subaru converters also contain ceramic materials that can be recycled.
Subaru catalytic converter scrap price
The scrap price of a Subaru catalytic converter can vary depending on the vehicle model and year. However, you can expect to be in between $50 and $120 for a converter🇧🇷
Remember that scrap prices fluctuate, so it’s important to check the current market value before scrapping your converter.
How to get back the value of your scrap Subaru Catalytic Converter
To get the best price for your converter, it’s important to know what type of converter you have and what materials it contains.
When you take your converter to a junkyard, they will weigh it and give you a price based on the current market value of the metals contained.
You can also contact a local recycling center to see if they accept converters. Some centers may offer a higher price for converters than junkyards because they can recycle the materials inside.
Can you mine the precious metals yourself?
There are a few ways to extract precious metals from your old catalytic converter. One way is to use a process called aqua regia, which involves using a mixture of hydrochloric and nitric acids. This method is effective but can be very dangerous if not done correctly.
Another way to extract these metals is through electrolysis, which involves passing an electric current through the catalytic converter. This method is also effective, but it may take longer than aqua regia.
While it’s possible to do it yourself, you should only do it if you have the proper equipment and knowledge, as this process can release harmful chemicals into the air if not done correctly.
When in doubt, leave it to the professionals!
Disposing of your old catalytic converter can be a great way to earn some extra cash. By knowing what type of converter you have and what materials it contains, you can get the best price for it. So before you scrap your converter, make sure you do your research.